Quantcast
Channel: Tomato Firmware
Viewing all 11025 articles
Browse latest View live
↧

Beamforming on Tomato

January 3, 2016, 2:21 pm
$
0
0
I'm picking up a Linksys EA6500v2 which is arriving in a few days, and want to use DD-WRT or Tomato on it (have used both in the past and I slightly prefer Tomato). I'm particularly interested in beamforming, which my current router does not support, but wanted to make sure this is something supported by Tomato going in.

I know there are toggleable options in DD-WRT for both explicit and implicit beamforming, but from what I understand this is just "always-on" in Tomato - is this correct?...

Beamforming on Tomato
↧
Search

Error log with IPv6

January 3, 2016, 4:08 pm
$
0
0
I'm struggling getting IPv6 to work with Time Warner on my Asus RT-n66u running Toastman 0507.2 VLAN VPN. If I plug a laptop directly into the cable modem, I get an IPv6 address (I think it's a /128). But the router never gets any IPv6 connectivity.

I have it set to DHCPv6 with 64 bit prefix delegation, and to accept RA from WAN. I also have the boxes checked to announce IPv6 on the LAN with DHCP and SLAAC. I also unchecked the box to fix Comcast's DSCP bug, which didn't seem to have an...

Error log with IPv6
↧
↧

RT-N12 D1 and Shibby

January 3, 2016, 4:14 pm
$
0
0
I've got Shibby 123 on my mother in law's new RT-N12 D1. It seems to work well, though the Status - Overview page lists the router model as RT-N12 B1. Also, the Wifi LED doesn't turn on. Are there other issues, or is these the only (very minor) things?

Other than that, things seem to be working just fine.

Thanks, Shibby!
↧

ifconfig: high frame value

January 3, 2016, 5:01 pm
$
0
0
I have been experiencing some performance problem with Internet recently so decided to do so little digging. After a couple of commands I have immediately noticed:

Code:
root@tomato36k:/tmp/home/root# ifconfig eth1
eth1  Link encap:Ethernet  HWaddr BC:EE:7B:31:6B:D0
  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
  RX packets:288221 errors:0 dropped:0 overruns:0 frame:576772
  TX packets:954706 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:1000
  RX bytes:33313555...
ifconfig: high frame value
↧

arm entware flexget installation

January 3, 2016, 5:29 pm
$
0
0
Ok I have a ac68u router with shibby 132 AIO. so this is a work in progress.....

I have installed entware arm version and then
Code:
opkg installl python python-sqlite3 python-yaml python-openssl python-setuptools
easyinstall pip
pip install flexget
Code:
flexget -V
returns 1.2.422

but I am trying to create a config file. never done this before. Does not matter what I put in the config.yml I always get the same error.

flexget --test

Code:
2016-01-04 01:24 INFO...
arm entware flexget installation
↧
↧

Route only specific ports through VPN (openvpn)

January 3, 2016, 7:38 pm
$
0
0
Hi,

Tomato and OpenVPN are working perfectly, all traffic is encrypted.

Now, is there any way to get only connections to ports 80 and 443 to go through OpenVPN, while all others - p2p and stuff go unencrypted?

I tried playing with iptables, but unfortunately, none of the examples I found on the internet worked.
Did anyone manage to get this working?
↧

Slow Connection between WAN and LAN - Tomato Shibby

January 3, 2016, 9:47 pm
$
0
0
Hi,

I have a Linksys/Cisco WRT320N with Tomato (Shibby) which has 1xWAN Ports and 4xLAN Ports. Every port is specified as a Gbit-Port, but i noticed slow speeds if the connections goes out on the WAN-Interface.
Therefore i did some testing with iperf, and realy: A Connection between a Computer in WAN and LAN has a maximum bandwith of ~110Mbit/s. If i turn on QoS it goes down to 30Mbit/s.
Interesting fact: If i test a connection which just goes through the LAN-Switch of the Router the...

Slow Connection between WAN and LAN - Tomato Shibby
↧

New to Tomato, need help flashing.

January 3, 2016, 11:41 pm
$
0
0
Hi,

I just purchased a NETGEAR R7000 and I plan on installing Shibby(I had DD-WRT on a ASUS RT-N16). I have watched the YouTube guide and I have downloaded the appropriate Initial and AIO files to flash, but those files are 118 and the newest version is 132.

If I were to flash the 118 Initial and then AIO, can I upgrade straight to 132 from the GUI or do I have to update incrementally?
↧
Search

Wifi Access Point with Isolated Guest SSID

January 4, 2016, 11:35 am
$
0
0
Shibby Tomato configured as wifi access point with WAN disabled. Need help configuring isolated wireless guest network.

Basic-Network-LAN:
Bridge br0, STP disabled, 192.168.0.250 netmask 255.255.255.0, DHCP server disabled
Bridge br1, STP disabled, 192.168.2.250 netmask 255.255.255.0, DHCP server enabled

Advanced-Virtual Wireless:
wl0, enabled, 2.4GHz, Access Point, br0
wl1, enabled, 5GHz, Access Point, br0
wl0.1, enabled, Guest, Access Point, br1

Advanced-VLAN:
VLAN0, LAN ports, br0...

Wifi Access Point with Isolated Guest SSID
↧
↧

OpenVPN issue when configured on Tomato Shibby

January 4, 2016, 11:59 am
$
0
0
Hello All,

I have been trying to get a VPN service on my router but after testing four options I get the same results were using the windows app they provide gives good upload and download speeds but when configured on a router with shibby, the speeds are terrible.

The only difference I see when comparing the logs between the router and the PC app is the version of OpenVPN and OpenSSL version, but the router is newer.

It seems like the router is at fault here but the cpu, memory, etc....

OpenVPN issue when configured on Tomato Shibby
↧

connecting a printer (USB) to the netgear R7000 (shibby 132)

January 4, 2016, 1:17 pm
$
0
0
Hello all,

wondering if anyone successfully managed to connect their USB printer to the R7000 (with tomato) and define it and print with it.

I have tried several guides I found online but nothing seems to work.

what I do is look for a printer on a TCP/IP (my router's IP) and then choose the drivers for it. installation seems to be successful but nothing prints.
Of course I have enabled "USB printer support" in Tomato.

any help, tips or steps will be appreciated.

thanks.
↧

Issue installing

January 5, 2016, 12:38 pm
$
0
0
So my new Linksys EA6500v2 arrived today, and the first thing I tried to do was install Shibby's Tomato on it.

I logged in to the stock GUI, selected as a firmware upgrade "tomato-EA6500v2-ARM--132-AIO-64K.trx" and hit Upgrade. It seemed to go smoothly, and went to reboot. After it came back up I found couldn't access the GUI using 192.168.1.1. Kept getting "connection refused" in any browser.

Ok... so I rebooted both my PC and the router. The router rebooted, stayed up (solid Linksys...

Issue installing
↧

Need Help flashing Netgear WNR2000v2 with Shibby

January 5, 2016, 3:12 pm
$
0
0
So i have recently flashed my wrt54g with dd-wrt, and i wanted to flash my wnr2000 with shibby. However, I cant find the right download for it.

Thanks
↧
↧

Tomato by Shibby use all three Antennas on Asus RT-N66U?

January 5, 2016, 3:54 pm
$
0
0
Hello Experts,

i like to install Tomato by Shibby (use tomato-K26USB-1.28.RT-N5x-MIPSR2-132-AIO-64K.zip) on my Asus RT-N66U.
Think this is a great Firmware, i have also used this on my WRT54G for many years :)

But i have a question.
Does Tomato by Shibby use all three antennas?
If i look at the Advances / Wireless menu i see at Receive Antenna and Transmit Antenna only AUTO / A / B, so i think there is only use two antennas?
Or does Tomato by Shibby also use all three antennes like stock...

Tomato by Shibby use all three Antennas on Asus RT-N66U?
↧

"the wireless router is not in rescue mode" ?? asus rt-n66u help

January 5, 2016, 5:12 pm
$
0
0
hey guys

I just got a asus rt-n66u and tried to install tomato to it for the first time, after holding down the reset button and plugin the power cable for RT-N66U and go into firmware restoration utility and upload Tomato after couple of seconds I get "the wireless router is not in rescue mode"
anybody know what I am doing wrong?
thanks
↧
Search

Asus RT-AC3200 supported by Tomato

January 5, 2016, 7:07 pm
$
0
0
Hi,

I just wanted to tell you that i finished Tomato-ARM7 for this router. Why ARM7? Because this Tomato is using Broadcom SDK7 and include Wireless Driver 7.14.43.40 (r527781).

This is also first Tomato with new DHD wireless driver.

View attachment 4091

What works:
- WAN/LAN and all 3 wireless interfaces (1x 2,4GHz and 2x 5GHz)
- VLAN and CTF
- USB & Tuxera NTFS Driver
- 4G/LTE modems (Hilink and non-Hilink)
- all LEDs

Know issue:
- QMI support is broken
- JFFS support is broken...

Asus RT-AC3200 supported by Tomato
↧

Can't get above 100MB/s on RT-N66U (Shibby v121 AIO 64k)

January 5, 2016, 7:46 pm
$
0
0
I just upgraded my connection to 200/20 and I can't get above about 100MB/s on the WAN -> LAN. I'm running I've disabled QOS, tried enabling BCM_NAT, and a few other things. No dice. The WAN port shows 100M Full. I'm not sure what it should be showing in this case, but that could indicate something. Any suggestions would be much appreciated!
↧
↧

Default Gateway not working on ASUS RT-N53 running 1.28.0000 MIPSR2-131 K26 USB RT-N53

January 5, 2016, 8:17 pm
$
0
0
I am using a ASUS RT-N43 running 1.28.0000 MIPSR2-131 K26 USB RT-N53:

nvram set pmon_ver="CFE 5.70.55.33 @VERSION_TYPE@"
nvram set hardware_version="RTN53-1.0.1.7"
nvram set os_version="1.28.0000 MIPSR2-131 K26 USB RT-N53"

I have configured a default route as shown:

nvram set routes_static="0.0.0.0<172.23.74.200<255.255.255.0<0<LAN1<Default Gateway"
nvram set routes_static_saved="0.0.0.0<172.23.74.200<255.255.255.0<0<LAN1<Default Gateway"​

I have configured DNS as...

Default Gateway not working on ASUS RT-N53 running 1.28.0000 MIPSR2-131 K26 USB RT-N53
↧

Tomato MultiWAN

January 5, 2016, 8:24 pm
↧

Continuing issues

January 5, 2016, 9:42 pm
$
0
0
Per my other thread I did eventually manage to get AdvancedTomato (tomato-EA6500v2-AT-ARM-3.0-132-AIO-64K.trx) onto my new Linksys EA6500v2. Unfortunately, I cannot make any network changes at all. Even trying to do something as innocuous as changing my WiFi password pops up an error message stating: "Cannot proceed: two or more LAN bridges have conflicting IP addresses or overlapping subnets". Again, I have made zero configuration changes other than installing AT and accessing its GUI for...

Continuing issues
↧
Viewing all 11025 articles
Browse latest View live
Search