Addon: Add Blocking
Basically, it blocks all ads and trash websites via the DNS cache poisoning method Updated: 08 July 2008 v2.1 This script differs from others: Automatic Update (every 6 hours) (configures itself)...
View Article[SOLVED] Configure a guest network using 2 tomato routers
Hi, I've documented the necessary steps in order to configure a guest network using two tomato routers and achieve the desired objectives (listed below) Also, please point out any foreseeable issues,...
View ArticleCan only lease ip from port 1, not WAN port
Tomato Firmware v1.28.9054 MIPSR2-beta K26 USB Ext Router: ASUS NT-R16 I know I'm on a terribly old version, but for now I'm enjoying the learning experience and challenge of making this work. I'll...
View Articlehow to have/set up a Dual Gateway?
Hello there I'm not sure if the title is the right term for what I'm looking for. I hope this is right. I'm not experience so I need your kind help. I have an Asus RT-N16 flashed with Shibby's 114. I'm...
View Articlebr1 (wl0) skip QoS
I have setup a tomato router with QoS. I have 2 networks. LAN (br0) for home and LAN1 (eth1/wl0) for guests wi-fi network. I created eth1(wl0) to bridge to LAN1 (br1). LAN1 can't reach LAN. I get a...
View ArticleAG300 - desperate need for mtd dump
hi all, I'm not really in topic, but probably here I find people that know what I'm talking about. I'm writing because I'm trying to install an alternative firmware on AG300. I made some mess and now...
View ArticleCurrent USB 3G modem support?
I've been away from the forum for a while because, well, my E3000 router just worked perfectly and didn't feel the need to change anything. But now I've moved to a place where the only internet is via...
View ArticleComplex Ethernet Bridge/AP Config
Tapatalk ate my last post so here's a short version. Router 1 is a Ethernet bridge getting wifi to my desktop. Router 2 is an Ethernet bridge that needs to access the VLAN from router 1 but I would...
View ArticleShould I clear the NVRAM after this mistake?
Haste makes waste. i accidentally flashed my NT-N66U with the wrong firmware (tomato-K26USB-1.28.0503.4MIPSR2Toastman-RT-N-VLAN-Ext.trx) which killed my connectivity upon rebooting. The fix I used was...
View ArticleCurl not working?
I keep getting this error when I try to use curl: Code: curl: line 1: syntax error: unexpected "(" Here is the command I run: Code: sh curl -d ResetReq=1 http://192.168.100.1/goform/RgConfig I tried...
View ArticleChange WAN Port MAC Address? (Tomato Shibby)
So I found the below script from here: http://www.dd-wrt.ca/wiki/index.php/Useful_Scripts#Auto_Random_MAC_Address Code: #!/bin/ash MAC=`(date; cat /proc/interrupts) | md5sum | sed -r...
View ArticleBi-directional VPN tunnel?
Alright, I just purchased four Netgear WNR3500L v2 routers and flashed them with Shibby's 1.28 Tomato firmware. I am really liking the firmware as it seems much more mature and less buggy than the...
View ArticleShibby N5x drains mobile power, AC6x doesn't
tl;dr version: Newer Tomato Shibby N5x firmwares can cause dramatically higher power consumption on mobile devices than AC6x firmwares. This can happen just by being connected to the router and idling....
View ArticleDonations
I don't know how many of you use Tomato for fun, business or just personal use but have you ever considered donating to the developers? I use Tomato at home but I've also set it up on almost all my...
View ArticleHelp with easytomato in router mode
Hi, I am having some trouble setting up the easytomato with two routers. I have two router in two subnets. The Tomato router (router 2 in GW mode) is connected to the lan port on router 1 in different...
View Articlevsftpd with ssl_enable=true not starting
Hi, everyone! I have installed the latest Tomato Firmware v1.28.7503.2 MIPSR2Toastman-RT K26 USB VPN on Netgear WNR3500L, and it all went OK except secured vsftpd config. Having set ssl_enable=true...
View ArticleTomatoe RAF & a Bonded Modem?
I have a bonded DSL Modem, and a E3000 running Tomato RAF Firmware v1.28.9013 MIPSR2-RAF-V1.2x K26 USB? I would like to put the modem into to the bridged mode, and let the router do the login. The...
View ArticleVLAN Configuration Problems
Tapatalk ate my last post so here's a short version. Router 1 is a Ethernet bridge getting wifi to my desktop. Router 2 is an Ethernet bridge that needs to access the VLAN from router 1 but I would...
View ArticleAC66u - UDP Broadcasts issue (non WOL related)
I have an issue i can't seem to solve, i'll try to explain it as clear as i can. TL;DR Question How do I enable broadcasts from my wireless clients to the WAN port, between different subnets? Why I...
View ArticleJust bricked rtN66U after Tomato upload
Hi all I just received thia Router and flashed the Router with Shibby latest build for this Router I followed all the instructions and changed the IP to Static etc but after the reboot I was unabe to...
View Article