br1 (wl0) skip QoS

I have setup a tomato router with QoS. I have 2 networks. LAN (br0) for home and LAN1 (eth1/wl0) for guests wi-fi network.

I created eth1(wl0) to bridge to LAN1 (br1). LAN1 can't reach LAN.

I get a DHCP address on LAN (subnet1) and LAN1 (subnet2), respectively.

I can see LAN traffic in the QoS details and everything is fine.

Once a guest is LAN1 gets an IP from subnet2 that subnet2 does not to go through QoS rules.

I just want LAN1 to use the same QoS rules as LAN. Any advice?