SANE daemon question
Anyone out there using Scanner Access Now Easy? I have it installed on my e3000 via Entware and it mostly works great. I'm using xsane on my clients, and all is well. Except... The scanner lamp never...
View ArticleShibby Tomato on Netgear Nighthawk - now one of my PCs BSODing
Thought I'd repost as a new thread instead. I just switched from DD-WRT to Shibby's Tomato yesterday. Everything's fine and my tens of devices at home are all happy, except one of my PCs started...
View ArticleCan't connect to router when using custom ip
The network I am trying to connect to his wireless Ethernet bridge uses IP addresses in the form of 192.168.169.xx so I trying to change my router's IP over to 192.168.169.100 but after doing so I can...
View ArticleTomato ARM optware feed
Tomato ARM optware feed built with the exact toolchain used by Shibby (as well as by Asus, to my knowledge) to build fw's for ARM routers now open for testing:...
View ArticleMemory Leak IPSec (Strongswan)
Hello everybody, I'm currently using Tomato in version "1.28.0000 MIPSR2-123 K26 USB AIO-64K" on my Asus RT-N66U. I installed Strongswan 5.2.1 via optware. VPN tunnels are working fine, but if much...
View ArticleEnable IPv6 on Access points?
Is it possible to enable IPv6 on access points that are connected to the main router via ethernet? Wireless devices often connect to the main router wirelessly with an IPv6 address but only with a IPv4...
View ArticleExtra unknown infrastructure device showing in windows?
I am running Windows 8.0 64 bit Enterprise edition. Every once in a while I will go to "My computer"->"Network" to find a router listed... normally this wouldn't be bad, however this time it is one...
View ArticleClik here to view.
Porting Tomato Firmware to other platforms
Well .. the thread is official, thanks to Toxic (linksysinfo.org admin) contacts we received from Belkin sample units to embed Tomato Firmware for WRT AC1900. A new platform, Marvell ARM 1.2GHz and a...
View ArticleImproving WNR3500Lv2 support
First and foremost, before responding: I'm talking about the Netgear WNR3500Lv2. Please note the "L" and the "v2" designators. I am not talking about the WNR3500v2. Herein I will refer to the...
View ArticleIssues with TomatoARM on an ASUS RT-AC68U
I'm having a bunch of issues with TomatoARM on an ASUS RT-AC68U: Web UI: Pages randomly get stuck indefinitely while loading. Hit refresh enough times, and they eventually load... most of the time....
View ArticleOpenVPN Server Help Please (QNAP VPN Client)
A very brief background ... I have two networks, as follows: Modem ==> RT-N66U (Merlin, 192.168.1.0/24) ==> WNR3500Lv1 (Shibby, 192.168.2.0/24) There is a QNAP NAS on the 192.168.1.0/24 network,...
View ArticleR7000 issues with Tomato by Victek and Shibby
Hey I have just "upgraded" from a RT-N16 to the R7000 and I was a big fan of Tomato on the RT-N16 as it had everything I needed and was very stable. Unfortunately I am having no such luck with my...
View ArticleBypass VPN Tunnel on Tomato Router
Hi everyone, I'm having a problem that I can't solve. I'm running an OpenVPN Client Tunnel with the PIA VPN Service. Everything works great, however I need to bypass the VPN for 1 LAN client. I found a...
View ArticleShibby: OpenVPN server port dissappeared, can't put back
VPN server on Tomato/Shibby has been working fine. I'm using build 121. Today I logged into the router, looked at the VPN config, and found that the VPN server port (which used to be 1194) was blank....
View ArticleRouter to Router connection options
I spent the weekend reading guides, but I'm still far from understanding the different wireless modes that let one router talk to another (Wireless Client, Wireless Ethernet Bridge, WDS, etc.) Previous...
View ArticleUse Toastman VLAN builds for MultiSSID?
Should I be using Toastman's VLAN builds if I want to setup multi SSIDs? Just want to check before I start re-configuring my router from the ground up.
View Articlewrt320N > E2000 dd-wrt move to tomato
Hi all, I have a WRT320N from my brother, that was bricked by him. he updated to openwrt but didnt finish it well. Ill managed to get it back to let it load a new firmware file. After this we decided...
View Articlechange tomatousb router ip address
how do you change the tomato router ip address. the dhcp is disabled on the tomato router. (connected to isp modem/router) that has the dhcp turned on.
View ArticleTomato RAF archive?
Is there a Tomato RAF archive? I had been running firmware tomato-E4200USB-NVRAM60K-1.28.9014MIPSR2-RAF-v1.3f.bin on a Linksys E4200. I recently installed firmware tomato-RT-AC66U_9014-RAF-v1.3g.trx on...
View ArticleNew Tomato firmware for D-Link DIR-865L AC1750 router
After having problems (mainly missing 5GHZ and no USB power) with the tomatoegg firmware that was posted in tomatousb.org previously, I have decided to port a new Tomato firmware to support Dlink...
View Article