On a Linksys E1200 v2 with Shibby 1.28, I'm trying to configure so that one VLAN supports just email and light web browsing. I don't want the default VLAN throttled to any significant degree.
But to allow Priorities to work, I did enable QoS and set a Max Outbound Bandwidth Limit of 750 (with our measured minimum being around 890), then I set the WWW ceiling to 90%.
In the VLAN to be throttled with Port 4, I set the Upload Rate and Ceiling to 200. I also temporarily set a D/L Rate and Ceiling...
Upload bandwidth limiter not working in Shibby [SOLVED]
But to allow Priorities to work, I did enable QoS and set a Max Outbound Bandwidth Limit of 750 (with our measured minimum being around 890), then I set the WWW ceiling to 90%.
In the VLAN to be throttled with Port 4, I set the Upload Rate and Ceiling to 200. I also temporarily set a D/L Rate and Ceiling...
Upload bandwidth limiter not working in Shibby [SOLVED]