Is it possible to alter the VLAN GUI so the port order shows correctly? I have a fresh firmware install and my NVRAM has been cleared (thorough).
Here are the physical port states. This is correct. Port 4 is for my IPTV and is on VLAN2. Everything works perfectly.
![[IMG]]()
The NVRAM shows like this (also correct):
# nvram show | grep vlan.ports
vlan0ports=
vlan1ports=1t 2t 3t 8*
vlan2ports=4 8
vlan3ports=8
vlan4ports=8...
Can VLAN GUI port order be corrected?
Here are the physical port states. This is correct. Port 4 is for my IPTV and is on VLAN2. Everything works perfectly.
![[IMG]](http://i234.photobucket.com/albums/ee28/psy-q/forums/ports.jpg)
The NVRAM shows like this (also correct):
# nvram show | grep vlan.ports
vlan0ports=
vlan1ports=1t 2t 3t 8*
vlan2ports=4 8
vlan3ports=8
vlan4ports=8...
Can VLAN GUI port order be corrected?