This appears to be the latest build I can use on my device due to limited flash, a WRT54GL.
I am trying to get native IPv6 to work. I have a /64 point to point link and a /48 from my ISP, which is routed over the /64.
I have tried putting the numbers both ways into the IPv6 settings on the GUI, and I cannot get it to work. Strangely the addresses entered for the router show up as local, in the routing table and not as vlan1 or br0 as I would expect.
I have even tried setting the point to...
Trying to use Native IPv6 with V1.28.000 MIPSR1-107 K26 MiniIPv6
I am trying to get native IPv6 to work. I have a /64 point to point link and a /48 from my ISP, which is routed over the /64.
I have tried putting the numbers both ways into the IPv6 settings on the GUI, and I cannot get it to work. Strangely the addresses entered for the router show up as local, in the routing table and not as vlan1 or br0 as I would expect.
I have even tried setting the point to...
Trying to use Native IPv6 with V1.28.000 MIPSR1-107 K26 MiniIPv6